How to Set up Magic Shake for Ultraloq Smart Lock

How to Set up Magic Shake for Ultraloq Smart Lock

How to Set Up Magic Shake for Ultraloq Smart Lock?

Please follow the steps below to set up the Magic Shake.
Step 1. Open the U-tec App and select the lock.
Step 2. Click the Settings menu (gear icon).
Step 3. Scroll to Magic Shake then click it. 
Step 4. Enable/Disable the Magic Shake and adjust the Times.



Troubleshooting

If you have enabled the shake, but can't unlock it, please follow the steps below for troubleshooting.
Step 1. Check if you can use the U-tec App to unlock/lock the Ultraloq Smart Lock through Bluetooth directly.
Step 2. Check if the smartphone has a shock after shaking.
If Yes, please go back to Step 1 to check the connection between the lock and phone.
If No, that means the U-tec App did not activate the Shake, it may be the problem with your shake operation or the phone's settings.
Step 3. Follow the animation and Times on the U-tec App to shake your phone. Please shake from right to left all the way.
Step 4. Open the U-tec App. It can't run in the background for more than 5 minutes. You can also try to turn off and turn on the U-tec App. When you move the App to the background, the Magic Shake function will only be valid for 5 minutes. You may need to close the App and open it again.
Step 5. Confirm if the smartphone or the other Apps have the same shake operation for the other features. For example, shake to activate your phone's screen, shake to next music, etc. 
Step 6. Check if your smartphone has the Gyro.
 

    • Related Articles

    • I'm having trouble pairing my smart lock with my phone. What should I do?

      If you're having trouble pairing your smart lock with your phone, there are a few factors you can check to determine the underlying cause. Lock not in pairing mode During the pairing process the keypad has to be activated for the TTLock app to ...

    • Why doesn’t my smart lock automatically lock when Passage Mode ends?

      If your smart lock does not automatically lock after Passage Mode ends, it is usually due to one of the following reasons. Auto Lock is turned off Auto Lock must be enabled for the door to lock automatically once Passage Mode ends. Check this setting ...

    • Why is my Smart Door Lock not powering up?

      There could be many reasons why your smart door lock is powering up. Following are some basic troubleshooting steps: Make sure you have installed good quality brand-new batteries. Check the battery polarity (i.e. + and - ) is correct. Check if the ...

    • Can I disable the sound on my smart door lock?

      Absolutely! Here's how you can easily turn off the sound on your smart door lock: 1. First, log in to the TTLock App on your smartphone. 2. Next, navigate to the Settings section within the app. 3. Select the option for Lock Sound. 4. From there, you ...

    • Why does my Smart Door Lock say "Unlock", but doesn't retract the latch/deadbolt?

      Q: What should I do if my Smart Lock says "Unlock" but doesn't retract the latch/deadbolt? If your Smart Lock say "Unlock" but fails to retract the latch or deadbolt, there are a few factors you can check to determine the underlying cause. Low ...