When pairing a new lock to the TTLock app, there is an operation failed error and locks prompts "Administrator deleted successfully"

When pairing a new lock to the TTLock app, there is an operation failed error and locks prompts "Administrator deleted successfully"

If the following errors occur when paring your smart lock with the TTLock app, please follow the steps below.
  1. The TTLock app throws an ‘Operation Failed’ error.
  2. The lock prompts ‘Administrator deleted successfully’
1. Turn Bluetooth off and back on in your phone's settings. This clears a stuck Bluetooth connection between your phone and the lock, which is the most common cause.
2. Check the TTLock app's location permission. Go to your Phone Settings → Apps → TTLock → Location, and set it to "While using the app". The app needs this permission to scan for the lock over Bluetooth, and without it the discovery step can stall or fail silently.
3. Install fresh batteries. Adding or resetting a lock draws more power than normal unlocking, so batteries that are low enough to still run the keypad day-to-day can be too weak to complete the pairing process.
4. Perform a factory reset. Reset steps vary by model - check your model's manual for the exact sequence. If the first attempt doesn't appear to complete, try it again a couple of times; a reset that "doesn't work" on the first try often succeeds on a repeat attempt.
5. Wake the keypad before you try to add the lock again. After a reset, touch the keypad so it's lit and awake at the moment you tap "+" to add it in the app - a sleeping lock won't show up in the discovery scan, which is the next most common failure point after a reset.

What success looks like: the app finds the lock in the scan, adding completes without an error, and the lock shows up in your lock list ready to be named and configured.

Idea
If the error persists after a factory reset and a few retries, contact us with:
  1. Your lock model and order number
  2. A short video with sound of the add attempt, from opening the app through to the error appearing
  3. The firmware version of the lock (visible in the app once a lock is bound, or on the box/manual if not)
  4. Your phone's make, model and OS version

If you need any further assistance or have any questions, please do not hesitate to contact us.


Related Articles
  1. I'm having trouble pairing my smart lock with my phone. What should I do?
  2. How to delete a faulty/damaged lock from your TTLock App?